구리를 위한 1개의 공통로 구부리는 및 펀칭기에서 3
Desan 3 in 1 Busbar Processing Machine can help you to process your copper bar.Such as cutting, bending, punching,embossing.It's easy to operate. Not only vertical bending but horizontal bending. With different kinds of molds they can process different kinds of operating. Also with 3 motors these three stations can work at the same time.
설명
| 기술적인 모수 | ||
| 함수 | 안건 | DSMX{1}}303ESK-B |
| 펀칭 | 펀칭 포스 | 300KN |
| 펀칭 범위 | ф4.3mm-ф30mm | |
| 최대 두께 | 12mm | |
| 최대 너비 | 150mm | |
| 절단 | 절단력 | 500KN |
| 최대 두께 | 12mm | |
| 최대 너비 | 150mm | |
| 굽힘 | 굽힘력 | 300KN |
| 최대 두께 | 12mm | |
| 최대 너비 | 150mm | |
| 외부 치수 | mm | 189013501400 |
| 모터 파워 | KW | 34KW |
| 무게 | 킬로그램 | 1300 |
| CNC 소개 | We use Siemens PLC control which you can just enter the angle. The bending precision is ±1 degree and repeat bending precision ±0.5 degree .Three stations can be work at the same time. You also can only enter item's height ad width to produce the item you need.(as Z type blending) | |
더 자세한 정보
1. 커팅 스테이션
With sharp scissors our cutting station can cut your copper bar easily. It won't waste your material and with smooth section. This station have button and foot switch. Help you easy to control this station.
2. 펀칭 스테이션
Punching station has turret which can help you easy to change the molds. You don't have to take the molds one by one so it will extend the life of molds. For the positioning, Not only the needle but we also have laser and ruler which can help you easy to position the place need to punched.
다른 모양의 펀칭 다이가 필요한 경우 언제든지 당사에 문의하십시오. 우리는 당신을 위해 사용자 정의 할 수 있습니다.
3.벤딩 스테이션
Horizontal Bending and Vetical Bending all can be processed by our 3 in 1 busbar bending and punching machine.
This part also adpots Simens PLC. Which can help you easy to caculate the bending type you need.
인기 탭: 구리, 공급 업체, 제조업체, 첫 번째 가격, OEM 공장, 판매를 위한 3 in 1 부스바 벤딩 및 펀칭 머신
문의 보내기
당신은 또한 좋아할지도 모릅니다
